Monday, September 30, 2019

Archimedes Principle

Applications of Archimedes' Principle 1. Submarine: A submarine has a large ballast tank, which is used to control its position and depth from the surface of the sea. A submarine submerges by letting water into the ballast tank so that its weight becomes greater than the buoyant force (and vice versa). It floats by reducing water in the ballast tank. -thus its weight is less than the buoyant force. 2. Hot-air balloon The atmosphere is filled with air that exerts buoyant force on any object.A hot air balloon rises and floats due to the buoyant force (when the surrounding air is greater than its weight). It descends when the balloon weight is more than the buoyant force. It becomes stationary when the weight = buoyant force. The weight of the Hot-air balloon can be controlled by varying the quantity of hot air in the balloon. 3. Hydrometer A hydrometer is an instrument to measure the relative density of liquids. It consists of a tube with a bulb at one end.Lead shots are placed in the bulb to weigh it down and enable the hydrometer to float vertically in the liquid. In a liquid of lesser density, a greater volume of liquid must be displaced for the buoyant force to equal to the weight of the hydrometer so it sinks lower. Hydrometer floats higher in a liquid of higher density. Density is measured in the unit of g cm-3. 4. SHIP A ship floats on the surface of the sea because the volume of water displaced by the ship is enough to have a weight equal to the weight of the ship.A ship is constucted in a way so that the shape is hollow, to make the overall density of the ship lesser than the sea water. Therefore, the buoyant force acting on the ship is large enough to support its weight. The density of sea water varies with location. The PLIMSOLL LINE marked on the body of the ship acts as a guideline to ensure that the ship is loaded within the safety limit. A ship submerge lower in fresh water as fresh water density is lesser than sea water. Ships will float higher in cold water as cold water has a relatively higher density than warm water.

Sunday, September 29, 2019

Customs and traditions in the USA Essay

Customs and traditions are important part of our culture, of our lives. Customs and traditions unite, build community. They provide identity. They tie us to our ancestors and heritage. They remind us of where we came from. Every country and every nation has it’s own traditions and customs. It’s very important to know traditions and customs of different people. It will help you to know more about the history and life of different nations and countries. Custom is a traditional and widely accepted way of behaving or doing something that is specific to a particular society, place, or time; a thing that one does habitually. Tradition is the transmission of customs or beliefs from generation to generation, or the fact of being passed on in this way; long-established custom or belief that has been passed on from one generation to another All countries have their social customs and peculiarities, and the US is no exception. The first group of custom which is worth speaking about is connected with meeting someone. When meeting someone for the first time, it is customary to shake hands, both for men and for women. Hugs are only exchanged between close friends. Kissing is not common. Among friends, it’s common for men to kiss ladies on one or both cheeks. Men don’t usually kiss or embrace each other. Americans usually introduce themselves by their first name and last name (such as â€Å"Hello, I’m John Smith†), or, if the setting is very casual, by their first name only (â€Å"Hi, I’m John†). The common response when someone is introduced to you is â€Å"Pleased to meet you.† Americans generally dislike formality or any sort of social deference due to age or position, and most quickly say ‘Please call me Rick (or Rita)’. To Americans, informality shows no lack of respect. Because of the rise of women’s liberation in America, women may be introduced with the title ‘Ms’ (pronounced ‘mizz’) and some women object to being addressed as ‘Miss’ or ‘Mrs’. In some social circles, women are introduced after their husbands, e.g. Mrs Chuck Whizzkid, in which case you shouldn’t address her as Chuck! Americans often reply ‘You’re Welcome’ or something similar when somebody thanks them, and they may think you’re impolite if you don’t do likewise. If someone asks ‘How are you?’, it’s usual to reply ‘Fine thanks’ and don’t complain even if you feel dreadful. Americans don’t have status or inherited titles (e.g. Sir or Lord) but it is necessary to defer to people with a professional title which has been earned. These include foreign diplomats (e.g. Sir), members of the Senate (Senator) or Congress (Congressman/Congresswoman), judges, medical doctors and others with a doctorate, military officers (e.g. General, Colonel), professors, priests and other religious ministers (e.g. Father, Rabbi, Reverend). If you’re invited to dinner, it’s customary to take along a small present, e.g. flowers, a plant, chocolates or a bottle of wine (but nothing extravagant or ostentatious). But choosing flowers you should remember that American people pay attention to the meaning of flowers. For example carnations are associated with bad luck, chrysanthemums are for cemeteries and roses signify love. Guests are normally expected to be punctual with the exception of certain society parties, when late arrival is de rigueur (provided you don’t arrive after the celebrity guest). It’s usual to arrive half an hour to an hour after the official start of a dance. Invitations to cocktail parties or receptions may state 5pm to 7pm, in which case you may arrive at any time between these hours. Dinner invitations are often phrased as 8pm for 8.30pm. This means you should arrive at 8pm for drinks and dinner will be served at 8.30pm. Anyone who arrives late for dinner or doesn’t turn up at all, should expect to be excluded from future guest lists. On the other hand, you must never arrive early. The custom of not taking off the shoes is peculiar to Americans. That is why don’t think of whether you should take off your shoes or not. If it is necessary the host will warn you about it himself. When watching American films I always wondered why Americans did not take off their footwear. The matter turns out to be that there is no much dirty and dust in American streets. Some people who were in America say that it is possible to sit on some pavements and not to make oneself dirty. One more reason explaining this custom is that majority of Americans prefer driving but not going of foot. That is why they are not afraid of dirtying their houses. Some families say grace before meals, so follow your host’s example before tucking in. Table manners are more relaxed in the U.S. than in many other countries. The fork is held in the right hand and is used for eating. The knife is used to cut something. To use the knife, the fork is switched to the left hand. To continue eating, the fork is switched back to the right hand. Don’t overstay your welcome. This becomes obvious when your host starts looking at his watch, talking about his early start the next day. The custom which is also typical for the USA is tipping. Most Americans are shocked by anyone who doesn’t tip or who tips too little. The one you will encounter most often is at restaurants. American restaurants do not add a service charge to the bill. Therefore it is expected that the customer will leave a tip for the server. Common practice is to leave a tip that is equal to 15% of the total bill for acceptable service, and about 20% for superior service. If the service was unusually poor, then you could leave a smaller tip, about 10%. Other professions where tipping is expected include hairdressers, taxi drivers, hotel porters, parking valets, and bartenders. The general rule is to tip approximately 15% of the bill. In situations where there is no bill the tip may range from $1 to $5, depending on the type of establishment and on how good the service was. The custom of tipping came to America from Great Britain. In the 18th century in Great Britain the boxes with the inscription T.I.P.S. which was meant To Insure Prompt Service were on the tables during having tea. Then this term came to America. Baby showers have been a tradition in the US for a long time now, and are growing in popularity here, too. What better excuse is there for getting a group of friends together than to celebrate a new life? Plus, the mum-to-be get lots of great presents for her and her baby, result! The only person who shouldn’t arrange a baby shower is the mum-to-be. The whole event should be great fun and completely stress-free for her. Friends, family or work colleagues are the usual organizers. You could either keep it as a surprise for the mum-to-be, or tell her what you are planning. Baby showers usually have some sort of baby theme to get everyone in the mood. Popular themes include: Teddy bear’s tea party. Get hold of as many teddies as you can and make sure each guest brings one, too! As presents, they could bring teddy bear-related books. The cake could be in the shape of a teddy bear. You get the general idea! Nursery rhymes. Arrange toys linked to nursery rhymes around the room , such as shoes (There was an old lady), a spider (Little Miss Muffet), a bucket (Jack & Jill’s pail), and toy boats (Row row row your boat). Ask guests if they can count how many rhymes are represented. Books. Ask each guest to bring a book that meant something to them as a child. It’s a great way for mum to start up her child’s library. For decoration, everyone could also bring books to arrange around the room. The cake could be in the shape of a fairytale book. One more tradition connected with babies is to give a baby a birthstone. The Tradition of Birthstones goes back further than written history. People wear jewelry containing stones designated for their Birth Month. In the USA there are a lot of traditions connecting with wedding. It is known that before marriage engagement takes place. As a rule a man invite a woman to the restaurant to make her a proposal. Engagement ring obligatory should have a brilliant. The diamond engagement ring originated with King Maximillian who presented Mary of Burgundy with a diamond ring in 1477 as a token of his love. And the ring is presented unexpectedly. It may found in the glass of champagne by the woman or in the bud of the rose. To my mind this tradition is very romantic. The tradition of a Bachelor Party which is held for the Groom and usually sponsored by The Best Man the night before the Wedding and a Bridal Shower which is usually sponsored by The Bride’s Maid is very popular in the USA. By the way the number of bridesmaids in America amount from two to twenty. The tradition of bridesmaids dressing the same as each other and in similar style to the bride comes from ancient days when it was believed that evil spirits have a more difficult time distinguishing which one is the bride and putting a hex on her. The tradition of a Wedding Rehearsal Dinner also takes place in America. It is usually celebrated between the immediate families of spouses in the late afternoon the day before the wedding. The Groom’s Family traditionally provides for this celebration. The Wedding Ceremony is most often performed as part of a religious ceremony each with its own specific customs and traditions. On the day of the wedding the Groom does not see the Bride until the actual ceremony. As Custom would have it from Victorian Times: the Bride wears Something Old, Something New, Something Borrowed, Something Blue, and a Sixpence in her shoe. The bride and groom exchange their rings to mark the permanent commitment of the new spouses to each other. The rings should be gold. According to history gold rings signified a financial sacrifice on the part of the prospective husband. Ring finger is the fourth ringer which is considered to be connected directly to the heart by a route that was called â€Å"the vein of love.† In the USA tradition of engraving of wedding rings is popular. The kiss on weddings dates back to the earliest days of civilization in the Middle East. A kiss was used as the formal seal to agreements, contracts, etc. In Ancient Rome a kiss was still being used as the legal bold to seal contracts. Hence the obvious use of the custom at the end of the wedding ceremony to â€Å"seal† the marriage vows. After the wedding ceremony newlyweds are covered with rice which is used as a symbol of fertility and as a wish for a â€Å"full pantry†. A Wedding Reception is usually held after the ceremony for all family and friends to celebrate. The Bride’s Family usually provides for this celebration. Traditionally the groom’s flower, worn on his lapel, usually matches one of the flowers in his bride’s bouquet. This tradition goes back to medieval times when knights wore the colors of their lady in tournaments. All of us know the tradition of throwing bridal bouquet and garter. The history of this tradition is very interesting I believe. In parts of Europe during the 14th contrary, having a piece of the bride’s clothing was thought to bring good luck. Guests would literally destroy the brides dress by ripping off pieces of fabric. In order to prevent this, brides began throwing their bouquets to the unwed girls. And grooms began to throw garter to unmarried men. One more wedding tradition is connected with CARRYING THE BRIDE OVER THE THRESHOLD Traditionally, the bride had to enter her new home the first time through the front door. If she tripped or stumbled while entering it was considered to be very bad luck. And the groom carried her over the threshold les she should stumble. Hence the tradition of the groom carrying the bride over the threshold. They bring us all together, no matter where we are. We can all relate to them and understand each other because we all use them. It is also a great connection for family and friends. There are traditions that are upheld for hundreds of years that are so important in our hearts. It links and connects us to past members of our family and our world whom we may never have gotten the chance to meet. They teach us about ourselves, our families, and the world around us. We can learn our history, why this tradition was started and what it signifies when we follow it today. They can work as the glue that holds us together. They are our culture, our heritage; they are us.

Saturday, September 28, 2019

Lord Woolf’s Reforms

Essay Title: â€Å"Although settlement, rather than litigation, poses a number of problems for a civil justice system these matters have been largely resolved by Lord Woolf’s reforms. † What is civil justice system? There are several definitions for the civil justice system. Every civilized system of government requires that the state should make available to all its citizens a means for the just and peaceful settlement of disputes between them as to their respective legal rights. The means provided are courts of justice to which every citizen has a constitutional right of access.Lord Diplock in Bremer Vulkan Schiffb au and Maschinenfabrik v South India Shipping Corp. [1981] AC 909, HL, p. 976. The justification of a legal system and procedures must be one of lesser evils, that legal resolution of disputes is preferable to blood feuds, rampant crime and violence. M. Bayles, ‘Principles for legal procedure’, Law and Philosophy, 5:1 (1986), 33–57, 57. The first impulse of a rudimentary soul is to do justice by his own hand. Only at the cost of mighty historical efforts has it been possible to supplant in the human soul the idea of self-obtained justice by the idea of justice entrusted to authorities.Eduardo J. Couture, ‘The nature of the judicial process’, Tulane Law Review, 25 (1950), 1–28, 7. There have been over 60 official reports on the subject of civil processing the past. Latest published reports were Evershed Report in 1953, the report of the Winn Committee in 1968, the Cantley Working Party in 1979, the Civil Justice Review in the late 1980s and the Woolf. All those reports are focused on the same objects like how to reduce complexity, delay and the cost of civil litigation. What are the problems before reforms?This is a mere compare of the pre-Woolf and post-Woolf civil landscape without baseline statistics. As research for the Department of Consumer Affairs (DCA) on the pre-Woolf litigation landscap e (pre-1999) demonstrates that: * 50% – 83% of defended cases in the county courts were personal injury (PI) claims * overall at least 75% of cases were within the small claims or fast track financial limit; in most courts this figure was 85% or more * the higher the value of the claim, the more likely both sides were to have legal representation * PI cases had high settlement rates and a small number of trials.Non-PI cases had a higher proportion of trials, and a much higher proportion of cases withdrawn. Debt cases were most likely to end in trial (38%) and in all of those the claimant succeeded. In 96% of all cases going to trial the claimant was successful * In all types of cases 50% of awards or settlements were for ? 1,000 – ? 5,000, and a further 25% – 33% were for ? 5,000 – ? 10,000. Costs in non-PI cases were relatively modest, and in PI cases around 50% had costs of ? 2,000 or less, 24% had over ? 4,000. Wolf ReformsLord Woolf’s approach to reform was to encourage the early settlement of disputes through a combination of pre-action protocols, active case management by the courts, and cost penalties for parties who unreasonably refused to attempt negotiation or consider ADR. Such evidence as there is indicates that the Woolf reforms are working, to the extent that pre-action protocols are promoting settlement before application is made to the court; most cases are settling earlier, and fewer cases are settling at the door of the court.In fact, most cases are now settled without a hearing. Lord Woolf, Access to Justice (Final Report, July 1996), identified a number of principles which the civil justice system should meet in order to ensure access to justice. The system should: (a) Be just in the results it delivers; (b) Be fair in the way it treats litigants; (c) Offer appropriate procedures at a reasonable cost; (d) Deal with cases with reasonable speed; (e) Be understandable to those who use it; (f) Be responsive to the needs of those who use it; g) Provide as much certainty as the nature of the particular case allows; and (h) Be effective: adequately resourced and organized. The defects Lord Woolf identified in our present system were that it is: (a) Too expensive in that the costs often exceed the value of the claim; (b) Too slow in bringing cases to a conclusion; (c) Too unequal: there is a lack of equality between the powerful, wealthy litigant and the under resourced litigant; (d) Too uncertain: the difficulty of forecasting what litigation will cost and how long it will last induces the fear of the unknown; (e) Incomprehensible to many litigants; f) Too fragmented in the way it is organized since there is no one with clear overall responsibility for the administration of civil justice; and (g) Too adversarial as cases are run by the parties, not by the courts and the rules of court, all too often, are ignored by the parties and not enforced by the court. The Basic Reforms of Woolf A syst em is needed where the courts are responsible for the management of cases. The courts should decide what procedures are suitable for each case; set realistic timetables; and ensure that the procedures and timetables are complied with.Defended cases should be allocated to one of three tracks: (a) An expanded small claims jurisdiction with a financial limit of ? 3,000; (b) A new fast track for straightforward cases up to ? 10,000, with strictly limited procedures, fixed timetables (20-30 weeks to trial) and fixed costs; and (c) A new multi-track for cases above ? 10,000, providing individual hands on management by judicial teams for the heaviest cases, and standard or tailor made directions where these are appropriate.Lord Woolf's Inquiry was also asked to produce a single, simpler procedural code to apply to civil litigation in the High Court and county courts. The Final Report was accompanied by a draft of the general rules which would form the core of the new code. Pros and Cons of wolf reforms * However, costs have increased, or have at least been front-loaded. In particular, in cases where mediation has been attempted and agreement has not been reached, costs are clearly higher for the parties. * Litigation will be avoided wherever possible.People will be encouraged to start court proceedings to resolve disputes only as a last resort, and after using other more appropriate means when available. * Litigation will be less adversarial and more co-operative. There will be an expectation of openness and co-operation between parties from the outset, supported by pre-litigation protocols on disclosure and experts. * Litigation will be less complex. There will be a single set of rules applying to the High Court and the county courts. The rules will be simpler. * The timescale of litigation will be shorter and more certain.All cases will progress to trial in accordance with a timetable set and monitored by the court. * The cost of litigation will be more affordable, more predictable, and more proportionate to the value and complexity of individual cases. There will be fixed costs for cases on the fast track. Estimates of costs for multi-track cases will be published or approved by the court. * Parties of limited financial means will be able to conduct litigation on a more equal footing. Litigants who are not legally represented will be able to get more help from advice services and from the courts. There will be clear lines of judicial and administrative responsibility for the civil justice system. The Head of Civil Justice will have overall responsibility for the civil justice system. * The structure of the courts and the deployment of judges will be designed to meet the needs of litigants. Heavier and more complex civil cases will be concentrated at trial centers which have the resources needed, including specialist judges, to ensure that the work is dealt with effectively. * Judges will be deployed effectively so that they can manage litiga tion in accordance with the new rules and protocols.Judges will be given the training they need to manage cases. * The civil justice system will be responsive to the needs of litigants. Courts will provide advice and assistance to litigants through court based or duty advice ; assistance schemes, especially in courts with substantial levels of debt and housing work. Final conclusion It can be concluded, overall the Reforms were supported by both branches of the legal profession, judiciary and both the lay and the legal press welcomed them. Promoting settlement and avoiding litigation can be the iggest boon to litigants who otherwise when get entangled in the costly and everlasting court procedures suffer a lot. The reforms intended to focus on reduction in cost and delay, however they did not escape criticism and reduction in cost is still considered to be a debatable area. But the reforms were a step in the right direction and were deemed triumphant as they have resulted in justice being accessible to wider proportion of society especially when problem is of small nature and can be quickly and cheaply dealt with in lower courts.Wholistically, the advantages of the Reforms outshine the disadvantages. The reforms were a positive way for the future; still a lot of work needs to be done in a few areas for making timely, inexpensive justice available to the lay man. Reduction in cost of litigation as a consequence of reforms was not fully realized but nonetheless it cannot be said that reforms had a detrimental impact on civil justice overall as timely exchange of information between the parties does promote culture of co-operation and settlement if not always and as a result of the reforms problem of delay in litigation were well catered.There was a move away from the adversarial culture and increase in out of court settlements was seen. It can be concluded that the foundation stone for a better and prosperous litigation culture has been laid, what needs to be do ne now is to rectify the shortcomings of the Woolf reforms and build on the so called revolutionary much needed positive reforms aiming to avoid litigation and promoting timely settlement of disputes, so that parties no longer are faced with the never ending litigation process.Bibliography * http://www. lawteacher. net/english-legal-system/lecture-notes/civil-justice-review. php * Cambridge University Press: 978-0-521-11894-1 – Judging Civil Justice: Hazel Genn: Excerpt * D. Gladwell, ‘Modern Litigation Culture: the first six months of the Civil Justice reforms in England and Wales' 19 Civil Justice Quarterly, 2000 pp. 9-18 * Gary Slapper and David Kelly, The English Legal System 9th edition, Routledge. Cavendish, Chapter 9(The Civil Process), pg 369. * P.

Friday, September 27, 2019

Protecting the Human Rights of Immigrants Essay Example | Topics and Well Written Essays - 500 words - 1

Protecting the Human Rights of Immigrants - Essay Example Immigrants come voluntarily to any nation. In fact, they often go to extreme economic hardship in order to immigrate to their country of choice. There is no homogenization among nations concerning visas, work permits and residency rules, much fewer immigration rules. Unless there is an incentive to creating and enforcing these rules, there is no way to impose or enforce compliance internationally, neither should there be. As a global group, there is very little that even the major nations can agree upon. There is even less than any group of nations would have the right to impose. The definition of what universal human rights are is anything but universal. Even if we could come to a vague agreement upon which rights should be universal, the degree to which any such rights are enforced could not be imposed. Therefore, authorities would be able to achieve individuality by the simple difference of application. The right to freedom from illegal imprisonment is one right that is close to being acceptable internationally. However, across the globe, there are main differences concerning the cultural focus of law. There is individual centred and group centred, That is, in some nations, such as America, the rights of the individual often take precedence over the rights of the group, except where so doing would violate more important rights. However, in China, the rights of the group are considered paramount about individual rights. So imprisonment of one individual is considered better than allowing that individual to interfere with the lives of the group in any way. T herefore, China jails dissenters or removes them from the area where they have â€Å"caused trouble†. Individual freedom of speech is less important than the group freedom from disturbance. So, protecting the rights of immigrants becomes even more difficult globally. One issue is women’s rights. American women take it as a given that a woman should have the right to dress any way she likes, as long as it is not publically lewd or insulting.  Ã‚  

Thursday, September 26, 2019

Terrorism and the Mass Media Essay Example | Topics and Well Written Essays - 2750 words

Terrorism and the Mass Media - Essay Example This paper argues that the media unnecessarily and irresponsibly represents the threat of terrorism particularly since the 9/11 terror attacks on US soil. In other words, the media engages moral panic in reporting and informing the public of the threat of terrorism. This paper is therefore divided into two main parts. The first part of this paper sets out the theoretical underpinnings of moral panic. The second part of this paper identifies how the theoretical underpinnings of moral panic are manifested in the media’s coverage of terrorism since the 9/11 terror attacks on the US. Moral Panic This paper analyzes the degree of moral panic used in the mass media in its coverage of terrorism following the 9/11 terror attacks. In this regard, moral panic is used within the theoretical structure espoused by Stan Cohen in 1973. According to Cohen (1973, cited in Critcher, 2003) every now and again, societies are seized by moral panic. To this end, moral panic is characterized by six essential features. First there is a â€Å"condition, episode, person or group or persons† who are defined as a â€Å"threat to societal values and interests†. Secondly, the nature of the perceived threat and the individuals or groups involved are represented in â€Å"stylized and stereotypical fashion by the mass media†.... Finally, â€Å"the condition then disappears, submerges or deteriorates and becomes more visible.†9 According to Critcher (2003) Cohen was describing a chain reaction instigated by the media’s exaggerated coverage of deviance among a group of young people who had come together on England’s east coast in 1964. The youth were identified as Mods and Rockers. At the gathering, the youth became bored and a number of minor altercations took place and the police were involved. The headlines in the Newspapers bored catchphrases such as â€Å"wild one†, â€Å"97 arrests† and â€Å"terror†.10 One editorial demanded that government take action and another newspaper explained friction between the two groups.11 Another incident allegedly involving Mods and Rockers occurred shortly after the first incident in other coastal towns. The newspaper carried essentially the same types of exaggerated reports as before. The spillover effect was evidenced by the jud iciary’s treatment of those who had been arrested. Many were denied bail, others were subjected to excessive fines for minor offences such as obstruction and those facing more serious offences were incarcerated. Local business representatives, citizens and politicians called for harsher consequences. Thus, according to Critchen â€Å" a whole new social problem had been defined†.12 A series of legislative interventions were observed with the passage of the Drugs (Prevention of Misuse) Act and the Malicious Damage Act. Other interventions included the police actively turning young people away from resorts on the coast. Anyone failing to take the police advice would be arrested. By 1966, gatherings on the coast diminished and

Best Practices for Network Security Research Paper

Best Practices for Network Security - Research Paper Example Several even have to care about how to show paces of owed upkeep and owed meticulousness to a rising register of supervisory obedience burdens. What can one do underneath such great weight to make an improved year, not an annum laden with lost time, network clear-out and obedience annoyances? I've derived what I would deliberate certain practices which can be classified the finest system safety rehearses. Finest practices are stuffs you do - steps up a ladder you climb - activities and tactics. Inside those strategies, I'm sure it will consist of which safety countermeasures to fit in the financial plan for the year. Though I believed in going into particulars about latest safety notions, such as amalgamated risk managing or system admittance resistor, it appears more suitable to place emphasis on the best objectives as a replacement for the best safety apparatuses you might deliberate positioning. For instance, I deliberate an encryption of one of the best practices and not an inven tion or instrument. I'm sure you'll discover many saleable and easily obtainable gears out there. You can continuously gauge those gears which you catch most suitable for your own best-practice archetypal. Shopping cart scheme took this encoded credit card material and stowed it, not encoded in basic manuscript on a record server that was linked to the Web server. Quoting Gary Mileisfeky, â€Å"These two servers were like putty to the hackers - one SQL Injection attack and thousands of consumer records were grabbed, sold and used for siphoning money from the credit cards†(12 Best Practices for Online Security). It is now possible for you to purchase lists of Social Security numbers, forenames, addresses, telephone information, bank account archives and credit cards on the black marketplace. It's now a business. Do not let your association be among those auxiliary lists. The paramount exercise is to look at all features of electric communique and records handling during the co urse of your association. That should comprise of all instantaneous text messaging, folder transmission, conversations, e-mails, connected conferences and webinars, also all records formation, alteration, storing, removal and recovery. How are customer archives kept? How are automated varieties of other personal material secured? Back-up data is not sufficient. You ought to arrange a VPN for those who have admission to your system from the external. Make certain the networks that allow admission onto the system over the encoded channel are likewise not the frailest relations in the substructure. Do not let them in if they are not completely mended, improved, polished for malware and legitimate. Moreover, if you lease an operative with a processor, get the apparatus back - and in the interim, shut their VPN channel. The planning phase is three-pronged and includes making policy declarations, piloting a risk investigation and launching a safety squad configuration. To fashion policy s tatements, the association requires the measure of what ranks of security are fitting and attainable by taking into deliberation the administrative arrangement, singular parts and accountabilities, rules previously present in the dwelling, facility level contracts concerning the IT division and

Wednesday, September 25, 2019

Analysis of Risks in Fund Investments with Focus on Mutual Funds Research Proposal

Analysis of Risks in Fund Investments with Focus on Mutual Funds - Research Proposal Example Fund investments are subject to the financial dynamics of the markets (particularly the capital markets). There are various ways of fund investment. In today’s global environment almost all fund investment strategies, even those related to the pension funds, are increasingly involving the stock markets. Since mutual fund investments are the most popular options of fund investments, there is the need to analyze the risks entailed in it, although mutual funds are based on diversified portfolio and professional management systems that aim at mitigating the risks.With the lapse of time, risks entailed in the mutual funds are surfacing (although mutual funds have always been regarded as safer options of fund investment). Over the period of investment, there are significant alterations in the risk levels associated with mutual funds. Risk shifting might be caused by ill-motivated trades of unskilled or agency-prone fund managers who trade to increase their personal compensation. Alt ernatively, risk shifting might occur when skilled fund managers trade to take advantage of their stock selection and timing abilities. Stock selection directly relates to the analysis and effects of market risks, while timing abilities relate to liquidity risk. Timely liquidation issues concerning mutual funds are an important consideration.In this context, a relative analysis with respect to hedge funds becomes significant. In this regard, changing market conditions, or in other words, market risks are again considered to be very relevant (Bollen and Whaley, 2009). In detailing the market risks, the factor of rise and fall of the stock prices manifests as equity risk. Impact of contractual incentives on delivering higher risk-adjusted returns has been researched by Massa

Tuesday, September 24, 2019

What is Stress Assignment Example | Topics and Well Written Essays - 1750 words

What is Stress - Assignment Example It should be said that these factors influence all people: adults and children, poor and rich, politicians and mineworkers. One can hardly find a person, who had never suffered from stress. The term "stress" has become familiar in our day-to-day vocabulary. In this short and at the same time capacious word we insert the comprehension of changes in own behaviour and a full scale of emotions and feelings, which come up in difficult situations or in danger, which have become essential of our modern way of life. However it is inherent to people to dramatise difficulties of a given moment. Human's existence had never been easy. Let us remember the history of mankind. The entire development of civilization from ancient times to today has been accompanied with continuous stress. In different times people suffered from hunger, wars, deceases, nature cataclysms, conflicts of interests, necessity to adapt to new forms of social structure and changes of technologies. So stress is not an "achiev ement" of modernity, it has just reshaped under the influence of new conditions.Nowadays the question of vital importance for the society is to cope with global work-related stress, which is observable in all spheres of human activity. . One of the most stress-liable groups is students. It is obvious that they have to cope with great physical and mental tasks. They often have to deal with lucubration in exams period. So stress is a 'shadow' of any student. That is why it is important for every student to know how to cope with stress. Let us consider General Exam Stress-Busting Tips, which have been offered by ISMA (n. d.), a registered charity with a multi-disciplinary professional membership, which exists to promote knowledge and best practice in the prevention and reduction of human stress. ISMA suggests all students Believe in yourself. Don't try to be perfect. Take steps to overcome problems. Don't keep things bottled up. Keep things in perspective. In the UK it is estimated that each working day 270,000 people are absent from work with stress, and in 1996 sickness absence cost UK business & 12 billion (Ameghino, 1998). The HSE report that almost twenty millions working days a year are lost because work-related illness, and off the two million suffers of job-linked illnesses, 500,000 workers say that stress is so bad that it is making them ill (Milne, 1998).Causes of stress According to Arthur (2004, p. 160), "employees do not become stress just because of character flaws or mental health vulnerability; rather the context in which people live and work can stress them". Work-related tress can be caused by various factors (stressors). The most widespread reasons of stresses are conflicts with the leadership and colleagues. Often the stress is determined by congestion with work, overwork. Stress can be provoked by numerous assignments and requirements of leaders, which must be fulfilled immediately, without taking into account opportunities of

Monday, September 23, 2019

Sports and Entertainment Management Essay Example | Topics and Well Written Essays - 750 words - 1

Sports and Entertainment Management - Essay Example For instance, we found out how important liquidity is for a company. Also, we have studied about various rules and principles that help pave a way towards success but rarely do we talk about the element of luck involved. There are many times when we are not sure whether we have taken a right decision and only time can unravel the truth. Some decisions turn out to be very fortunate while others turn out to be otherwise. The financial crisis of 2008 hit many businesses, large and small, and it was just bad luck for those businesses. It was not any fault on their part that they happened to be in such a dire situation. The most interesting aspect of this presentation, for me, was the emphasis on the formation of an effective team. Mr. X is a man of great skills. His academic qualifications may not be of the level that one expects from such a person but it is no secret that he is a man that possesses very important skill of creating and managing teams. He has the ability to multiply the s ize of any business that is handed to him. It is very important for a leader to assess the abilities of the members of his team. He needs to pick those people who can achieve something by working hard for it rather than just being lucky to have achieved it. The team members should also have an involvement in the decision-making process so that they can be more motivated and interested in doing what is asked of them. Further, the leader can never be complacent and must be active at all times. No one can be perfect and a good leader always looks to find out his weaknesses and of ways to overcome them. We are living in world which is changing so fast that a business always needs to investigate the effectiveness of its current strategy. The changes in technology are continuously putting the tastes of people in new moulds. This highlights the point that a business always needs to be aware of the changes in the tastes of its customers. The respected speaker currently belongs to the field of ice skiing and snowboarding. It is extremely hard to entice people to visit Canada and ski. However, there is a class of people that can afford to do this. But the problem is that as more and more gadgets are available for use at home, the interest in outdoor activities is diminishing. There is an overall decline in the world of sports due to this fact. Therefore, in order to establish whether one can be interested in skiing, a lot depends on how the individual is brought up. In the presentation, it has been emphasized that a leader should always be vigilant. It seems a very useful tip for a leader but it can also have a negative impact. A leader who is always looking for high standards might get too excessive in his approach. His constant concern with how the work is being done might irritate his team members and might make them think that he does not trust their abilities. The team members might take a lot of stress due to this excessive supervision which can have dire effects on their work. In my view, Mr. X is quite an autocratic leader because he defines very clearly what is expected from his employees, and holds the authority to make final decisions. It can be clearly seen from this presentations that when he asked his employees to give their â€Å"absolute best forecasts†, they were â€Å"incredibly conservative† when they gave him their numbers. This made me think why the employees that were â€Å"business people and finance people† did not give their honest opinions? This might be due to the fact that they were afraid that their boss would want more from them and they would be brought under pressure to deliver. It might have happened that they deliberately gave low forecasts so that they would not be

Sunday, September 22, 2019

Progressive Movement Essay Example for Free

Progressive Movement Essay The period from 1890 to 1917 in the history of United States is known as Progressive era. This period is marked by an all-encompassing and intensive change in all spheres of American life viz. political, economic and social. According to Nevin and Commager, this period was â€Å"marked by revolt and reform in almost every department of American life. Old political leaders were ousted and new one enlisted; political machinery was overhauled and modernized; political practices were subject to critical scrutiny and those which failed to square with the ideals of democracy were rejected. † (p. 382) These leaders from middle class pleaded for government regulation of big businesses to prevent exploitations pf the weaker sections. Stressing on the needs for reforms, Theodore Roosevelt said, â€Å"No hard-and-fast rule can be laid down as to the way in which such work [reform] must be done; but most certainly every man, whatever his position, should strive to do it in some way and to some degree. (Roosevelt) Most of the problems that Progressives wanted to tackle was an outcome of the industrial expansion and the political-industrial coalitions of the Gilded Age. During the Progressive almost every department of American life was overhauled and modernized. Thus Progressivism was a movement with â€Å"predominantly middle class objectives and viewpoint, deriving much of its support from small businessmen, farmers and professional people.† ( Parkes, p.544) At the federal level, the Progressive movement set in with the inauguration of the President Roosevelt curtailed the powers of the large organizations was epitomized through the suite against The Northern Securities Company in 1903. He introduced other legislative measures to breakdown the monopoly of the large corporations. Trust-Busting was the first radical step taken by Roosevelt that was aimed at the breaking of monopolies in any form and its abuses. Second major proponent of Progressivism at the Federal level was President William Howard Taft (1909-1913) who accomplished more progressive legislation than the Roosevelt. He introduced and enacted law to check corrupt practices during the elections. He dissolved ninety trusts under the Sherman Anti-Trust Act (these trusts were saving huge taxes in the name of charity and were involved in certain illegal activities). He strengthened the cause of democracy when he propagated the idea of direct elections for the senators and introduced 17th amendments in the U.S. constitution. Woodrow is the next in the row for progressive presidents. He introduced far-reaching economic reforms and adopted a number other progressive measure to capacitate the entire American spirit with purpose. Hs foremost priority was the revision of tariff and introduction of viable reforms. Secondly, he introduced another Act to reconstruct the monetary and banking sector. Although his program of more progressive reforms were cut short but the outbreak or WW II but two more constitutional amendment (18th and 19th) became effective in his presidency.[1] Progressives could not bring about the revolutionary transformation of the political and economic system. The evident disappointment of the Progressive movement was its disinclination to deal with racial discrimination. Although it had a national agenda but it was meant for Whites only. The Afro-American suffered from the victimization at the social and state level through disfranchisement, Jim Crow laws, and poverty.   Additionally, it failed to address the questions of class conflict and ended in despair for small owners and businessmen. Yet it cannot be denied that through their reforms they tried to revitalize democracy and made the rulers responsible and accountable to the public. â€Å"Perhaps the best known results of this era are the 18th and 19th Amendments, Prohibition and woman suffrage respectively. But this legislation really came at the tail end of the period that has come to be known as the Age of Reform. The amendments were actually the byproducts of an immense social and political upheaval which changed forever the expectations of the role government would play in American society.† (PBS) References Nevins, Allan Commager, Henry S. 1966. A short history of the United States. New   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   York: A. Knopf. Parkes, Henry B. 1959. The United States of America—A History. New York: Knopf. PBS. The Progressive Era 1900-1918. On-line. Available from Internet, http://www.pbs.org/wgbh/amex/eleanor/peopleevents/pande08.html, accessed 23 March   2008. [1] 18th Amendment of U.S. Constitution the process of introduction of Prohibition was completed whereas 19th Amendments granted the right of vote to the women on equal terms with men.

Saturday, September 21, 2019

The Structure and Use of 3D Models

The Structure and Use of 3D Models Guide showing the structure and use of 3D Models Topic 1 Structure of 3D models 3D coordinate systems Explain There are two types of coordinate systems that are commonly used in 3D graphics, either left or right handed, in both coordinate systems both the positive X and Y axis are the same with the Z axis being the only main difference. Analyse World The world coordinate system also known as universe or model coordinate system is the base reference for the overall model, all other models relate to. Local The local coordinate system relates specifically to a selected object when the object moves the local axis will move with is making it easier to animate. The local space has a completely separate xyz from the world/global xyz. Z-up Is one of the ground axis and is used to say how far a model is moved left or right depending on the number given. Y-up Is the up/elevation axis and is used to determined where a model is placed when moved either up or down depending on the number that is given. Evaluate the 3D coordinate system is extremely helpful as it gives us a visual reference on where an object/model would be in the 3d world. This allows us to position models exactly where we need them. Views of 3D models Explain There are two ways we can look at 3d models either perspective or orthographic, they are used to see the 3d model in either the view of the user (perspective) or as a flat 2d image (orthographic). Analyse Perspective Perspective is an approximate representation of an image as seen by the users eye, the most characteristic feature of perspective viewing are that objects appear smaller the further away as the distance from the object and observer increases. Orthographic Orthographic view has a fixed depth in which you cannot zoom in or out, and is used when checking if different models at different depths are the same size, this is done by making the models appear 2d. Evaluate both views have their advantages and disadvantages, where the perspective view can help you view the models/objects in a way that is natural to the human eye it doesnt help when youre trying to match the height of distant objects, whereas using the orthographic view allows you to see all objects as a 2D image allowing you to scale objects to the correct size. The Geometric Structure of Models Explain -ÂÂ   3D models are mathematical representations of an object, they can be compared to sculpting as a 3D artist would build or mold the object by taking into account all the sides and angles. The elements that make a 3D model consist of vertices, edges, faces and polygons, all of which can be manipulated individually in whichever software you choose such as blender, Maya or 3D studio Max. Analyse Vertex Vertices are the smallest point of a 3D model, they are made when two or more edges meet therefore corners of the polygons fuse together to make a vertex. The vertex is shared between all edges, faces and polygons and would affect all of these if the vertex is transformed. Edge The edge in a 3D model is a line which connects two vertices and borders faces and polygons, transforming these will affect all vertices faces and polygons which are connected to the edge. Polygon/face Face is a triangular surface connected by three surrounding edges and three corner vertices where as a polygon is an even four surface made up of four or more corners and two or more faces, high quality 3D characters are usually made of four sided polygons as ones with five or more sides can cause issues. Element the elements of a model are as follows tets, bricks, prisms, and pyramids these can be used to mesh any 3D model, with the 2D equivalents being triangular and quadrilateral elements. Surface normal modifying the orientation of surface normals affects the polygons appearance, when the surface normals are at right angles to a face light appears to bounce off the surface, this sharply defines the polygon face creating crisp edges, when set at different angles this allows light to roll off, which creates a smoother look. Evaluate knowing the structure of a model can help in deciding which shapes to start from and also to help manipulate the shape into the desired model/ object that you are looking for. The Structure of Different Polygons Explain There are three different ways of creating a mesh either using triangles quads or n-gons, tris and quads are more preferable than and n-gons are just avoided at all cost as they can cause issues. Analyse Triangles Triangles are a simple three sided polygon,made of three vertices connectingÂÂ   three edges, it is the smallest configuration needed to make a polygonal face. Also referred to as a tri. Quads Quads are the most desired type of polygon and most artist would use only quads as it makes their work more appealing to customers. They are made up of exactly four sides and four vertices, quads can also be referred to as quadrilateral polygons. N-gons N-gons are made up of more than four edges and vertices, n-gons can usually be divided into either quads or triangles or sometimes both which makes them easy to replace. They are usually avoided as they often create unwanted topology. Evaluate Using tris quads is very well sought after as theses are what computers can render them a lot faster especially quads, ngons on the other hand are usually avoided as they tend to cause distortion and deformation, tris can also cause this issue but not as much. Different methods of creating models Explain There are two different ways of creating models either with polygonal modeling or spline/curve based modeling, these are both used to create models with polygonal being the most used as it is more flexible but curve-based will make smoother curves. Analyse Polygonal modeling Polygons are created by using points in a 3d space called vertices, when they are connected together they form a mesh, which is used mainly for 3d models as they can easily be manipulated and rendered by computers quickly. On the downside they are planar and can only estimate a curved edge based on many polygons.ÂÂ   Spline/ curve-based modeling Curves are based off weighted control points, which when increased influences the curve closer to that point. The curve follows but does not always enter the points. Curve types include splines, nonuniform rational B-spline (NURBS), patches and geometric primitives. Evaluate The different methods in modeling be it polygonal or curved based both have different advantages and uses depending on what is needed, polygonal modeling is best used for 3D models as they can be rendered quickly by computers but the downside is that they are planar and can only make rough curves. Curve Based on the other hand is best used in a situation where curves and edges must be as smooth as possible such as in engineering, although manipulating it can be a lot harder. Pivot points Explain Pivot points are used to represent the location of a model in space, they are also used to control how models rotate and scale and move. All changes to a model are relative to the pivot point. Analyse -ÂÂ   Move moves the pivot point bringing the object that is connected to the pivot point with it. Scale increases or decreases the size of the object from the point of the pivot origin. Rotation rotates the object/model around the pivot point depending on the postion of the pivot point. Evaluate Having a movable pivot point is advantageous as it allows the object to be moved, rotated and scaled from different points allowing you to manipulate the object in many ways. UV coordinates Explain Are 2D coordinates used on a 3D model and are basically a textures x and y coordinates which always range from 0 to 1. With the V value going from bottom left to top left and the U value going from bottom left to bottom right, each vertex will have a uv coordinate value. Analyse -ÂÂ   UV mapping is usually done by unfolding a model, a pyramid for example, at the seams laying the model image onto a flat page once unwrapped the artist can then paint a texture onto each side triangle individually. Evaluate Allows for more detailed texturing and painting on 3D models by assigning pixels in the image to surface mappings on the polygon, this can then be easily exported to other 3d programs and then further adjusted. Mapping methods Explain -ÂÂ   Mapping methods are ways in which textures are applied to different models and objects, they are mainly used to quickly apply a texture to different shaped models depending on what the model shape is as some work better than others. Analyse Planar planar is used to apply a texture onto a flat model such as basic terrain and walls, when trying to place a texture on an uneven or complex surface it can often stretch and distort polygons that are not facing the projected map directly. http://www.gamasutra.com/view/feature/130484/uv_mapping_tips_and_tricks.php Box box mapping is done by placing a texture onto a model from six different sides, which is mainly used when you need quick mapping for less important of a model, and also used on technical or architectural objects. It is however not as useful for texturing more natural models where more accurate mapping is required. http://www.gamasutra.com/view/feature/130484/uv_mapping_tips_and_tricks.php Cylinder Cylindrical mapping is used for mapping more cylindrical models such as arms, cans and trees, it is one of the most used type of mapping but still needs tweaking afterwards in the uv editor. http://www.gamasutra.com/view/feature/130484/uv_mapping_tips_and_tricks.php Spherical Spherical mapping is mainly used to map out asteroids and planets, one downside is that it causes pixels to compact at the poles of the sphere. It can be used to block out mapping on human heads but loses its usefulness on models with multiple overlapping parts. Requires significant work afterwards. http://www.gamasutra.com/view/feature/130484/uv_mapping_tips_and_tricks.php Unwrapping unwrapping is done by creating uv coordinates which is generated for each vertex. One way is for the 3d modeler to unfold the mesh at the seams laying the model on a flat page, once unwrapped you can then paint a texture on each individual polygon. Pelt pelt mapping is used to map more natural models like animals and characters, pelt mapping allows you to pull a detailed uvw map flat allowing you to make a more accurate shape of the model which makes it easier to produce a more convincing texture. Evaluate Most mapping methods are extremely useful as they allow you to map a texture onto the different surfaces of a model as there are multiple choices to pick from there is usually one to fit the model you are working on, theses can save a great deal of time by quickly mapping the texture onto oddly shaped models which would be time consuming otherwise. The materials used on 3D models. Explain Adding textures to models is a lot more than just adding colours, you are also able to use different techniques and mpas to add more detail to the model letting you add effects such as shadows textures height etc. Analyse Base Colour, Albedo, Diffuse -ÂÂ   is the most common texture map, it specifies the pattern and colour of the object. It basically paints an image onto the surface. Normal Maps a normal map is a map which defines the direction your geometry normals are facing, with this info you can create a fakeÂÂ   the illusion of height to how the model is affected by light. Height Maps / Displacement Maps displacement maps are used when you need to add more detail to affect your model, this is a very powerful option as it actually affects the geometry.ÂÂ   Ambient Occlusion The occlusion map is used to define the areas of a model which should receive low or high indirect lighting. It is a grayscale image with white marking areas which should get full indirect light, and black for areas receiving no indirect light. An example would be a stone wall texture which is uneven. Specular Maps Specular mapping is used to define how well an area reflects light, the colour and bumpiness may be the same but using either dark or light tones you are able to change how reflective the surface is. An example would be a characters eyes compared to the skin or how a material reacts when wet or dry. Lightmaps are data structures used in light mapping, it works by pre-calculating the brightness of a surface and storing it in texture maps for later use. They are more used on static items so as the light does not need to be recalculated every frame. Evaluate using these can be extremely helpful in creating the models you desire without having to form the whole thing as some can help create the effects of textures, shadows height, and even make them seem more detailed which saves you adding more polygons to a model and increasing the count. http://blog.digitaltutors.com/understanding-difference-texture-maps/ The creation and use of convex collision hulls. Explain A convex collision hull is a simplified low poly count meshes that encases more complex objects, this is used to determine where a collision will occur on the object as well as other physic based interactions. Analyse It is an invisible mesh that stops the player and other models falling through each other, this can be costly on the graphics and processor power as the model triangles have to be calculated twice, once for the 3d model and once for the mesh collider. Each object must have a collision shape. Simpler shapes such as boxes, spheres and capsules are used as they are much faster to test but are less precise. Evaluate the collision hull helps make objects and models seem more to life by not letting you fall through walls and floors but can also affect how some objects are effected depending on how simple or complex the hull is compared to the model it is covering. Level of detail models (LODs) Explain LODs or level of detail are used to help render times by reducing the amount of polygons that show on models which are further away from the character, this is used to help rendering times and helps performance. Analyse LODs limit the amount of polygons on a model to help reduce rendering times whenever the character is at a distance, this helps keep focus on the immediate area and less at background scenery. Evaluate LODs can help increase frame render time by reducing the amount of polygons and detail that is on screen at any one time by determining whats more important or whats being focused on more and only giving that the proper amount of detail. Although this can help render time it may also cause some lag or drop in frames when too much detail is trying to load in at once. Vertex colour information Explain Vertex colour is a RGBA value that is traditionally used to add diffuse or emissive colour to the geometry of the model, this can be added to any vertex on the model. With more powerful games engines this can be used to do amazing things. Analyse Vertex colouring is used to colour foliage animations, baking inexpensive AO and lighting info, it can also be used to blend different materials on terrain or other meshes, but can be used for a lot more things Evaluate Vertex coloring can be used easily as it requires no UVs, although it is geometry dependant and not suited for high detail. Model constraints Explain When creating content such as 3D art for games and other real time applications there is constrictions which need to be applied to help increase performance and reduce render time. These constraints include polygon count, texture size and file size. Analyse Polygon Count The constraint on polygons count is that the more polygons or faces that appear within the render view the longer it takes for the frame to render, this limits polygons count to help with rendering time. This applies to games as well as non real time animations or special effects, this is all linked to the hardware available. Texture size textures need to be done effectively as the bigger and more complex the texture the longer the game will take to load it, this can cause the textures to take time to render and ruin the experience of the player. File Size The two main constraints that file size has is that 3D graphics need to be stored somewhere, either on disc a hard drive or in the cloud waiting for digital download. For this reason file size needs to be efficient to make sure they fit onto the the media that they are designed for, if the 3D art is too large for one disc it must be split onto two or more discs or may require an extremely long time to download especially for those with slow internet speeds. Evaluate Model constraints help with loading and rendering times by limiting the amount polygons and textures the artist is allowed to use, although this seems bad if there was no constraints the game would not load well and have constant drops with the frame rate, the downside to this is that the game will unfortunately not have everything that the developers wanted as some things may need to be cut due to file size restrictions. Topic 2 Uses of 3D models Decorative meshes Explain Decorative meshes are used to decorate a blank 3D world and make it more interesting, theses decorative meshes can range from indoor items such as chairs tables etc, to outdoor objects such as cars, trees and wells for example. Decorative meshes also help to make the 3D world seem a lot more interesting and also help make itÂÂ   more true to life and improve the players experience. Analyse these consist of multiple objects such as cars, trees, bushes etc which is placed around the 3D world so as its not blank and more interesting. Evaluate The advantage of using decorative meshes is that it increases the realism of the world theyre placed, they also improve the players experience as they are not walking around a bland world. Environment meshes Explain Environments are what a 3D world is made from, every environment also needs to be filled with 3D meshes, a balance of quantity and quality must be found as this needs to be as good looking as possible but also needs to be done efficiently. Analyse Environment meshes are used to create the 3D worlds invitroment, be in be buildings or other structures, this needs to be able to be done effectively and quickly as its a main part of the world but not all the focus will be on it. Evaluate Allows for a more immersive world as it adds character to the area and can also set the mood depending on the art style used. Modular meshes Explain Modular meshes for 3D environments are used to create fast environments using small tiling models and maximum flexibility, to make this as effective as possible you should first make sure that the grid for the 3D package is the exact same as the grid that the engine youre going to make the model for. Modular meshes can be reused to save time on developing multiple models. Analyse modular meshes can be made into kits, for example piping for walls, so that the developers and artists can reuse them to speed up the process without putting in as much work for areas that require less attention. Evaluate the advantage of using modular meshes are that you are able to quickly create game environments with maximum flexibility to change when needed, they are also reusable meaning you can keep a certain art style no matter the size. The downside to this is that the reused art style can quickly become repetitive. Meshes used for non-skeletal animation Explain Games can have a number of models which can be used for non skeletal animation these tend to be models which are not rigged (i.e with a skeleton) examples of these can be doors, boxes with lids that open, shop signs and even platforms can be animated to move. Analyse non skeletal animation works by the object or model not having a rigged skeleton allowing it to move or swing freely, for example a door may swing on its hinge, to create this the pivot point of the door must be placed at the point in which you want the door to swing. Evaluate the advantages of non skeletal animation are that it allows the game world to flow more freely using swinging doors, and makes the game seem more life like having signs and lids able to open. Skyboxes and skydomes Explain A skybox is made from a cube with six images that inclose the player, they can also be known as environment maps. The player is placed in the middle of the box so that no matter which way they look they just see different parts of the box. The game engine makes sure that whichever part of the box is visible to the player the proper pixels are shown. Sky domes work in similar ways but is a 3D sphere or hemisphere, and can be animated to improve realism. Both the skybox and skydome usually has a texture of the sky on it depending on the game and whats needed. Analyse skyboxes are simple cubes which consist of fewer polygons than the skydome, no matter where the player is they will always see the relevant part of the skybox. Skydomes are more detailed as they contain more polygons and allow the maker to animate it to improve the realism of the 3D world. Evaluate the advantage of using a skybox is that it uses up less polygons and if easier to texture, although it does not look as good as a skydome. The skydome on the other hand allows you to use vertex colour you adjust the hue in a smoother way, this allows you to animate the sky depending on the time of day. Rigid bodies Explain Rigid bodies allow your models and objects to act under the control of physics, the rigid body can be given forces and torque to make it move in a more realistic way. Any objects you wish to be influenced by physics or other added forces must have a rigidbody.ÂÂ   Analyse rigid bodies can be affected by different physics such as: Mass This determines the weight of the object usually in kilograms by default Drag Drag determines how air resistance affects the object while moving (from 0 air resistance to infinity meaning it stops immediately) Gravity Determines if the object is affected by gravity if dropped for example. Evaluate Rigid bodies are extremely useful when wanting to make a game which either has real to life physics or if you want to make the game with wacky physics as you are able to mess with the properties of each. Fracture/breakable meshes Explain Fracture or breakable meshes are used to make in game objects breakable for example doors, walls and in some cases building can also be destroyed, this can help the game feel more realistic as it adds real world physics to the game, it can also add new things for players to try out and in general make the game more fun. This can be broken down into more points such as chunk count and modify points. Analyse Chunk count determines how many chunks the tool will cut the original mesh into, a large amount of pieces means theres more triangles in the final object and more pieces that will be left behind after. A smaller amount means there are fewer triangles and less pieces after the object is destroyed. The modify points tool can be used to move the selected or all the chunk origins towards the bounds of the object or perturb some or all of the chunks in the slice pattern moving the pieces towards the bounds is useful as it helps avoid chunks being discarded because they dont slice the surface of the mesh. Evaluate -ÂÂ   Breakable meshes are used to help make games more realistic by letting you destroy some of the environment or some objects/models like you could in a real world situation. This however can have drawbacks on render time and frames as it requires more polygons to make the broken pieces. References () 3D Modeling: Creating 3D Objects, Available at: https://www.sculpteo.com/en/glossary/3d-modeling-definition/(Accessed: 6th October 2016). () Collision Meshes Game Models, Available at: http://www.katsbits.com/tutorials/blender/collision-models.php(Accessed: 8th October 2016). () Fractured Static Meshes, Available at: https://udn.epicgames.com/Three/FractureTool.html (Accessed: 4th October 2016). () Rigidbody, Available at: https://docs.unity3d.com/Manual/class-Rigidbody.html (Accessed: 11th October 2016). (2014) 3D Constraints, Available at: https://docs.google.com/document/d/1cJlmKMQXiCHPX1zRKV3K1biO4EwH13_WOIt_8BJ7K6g/edit#(Accessed: 16th October 2016). (2014) The pivot point, Available at: https://knowledge.autodesk.com/support/maya/learn-explore/caas/CloudHelp/cloudhelp/2015/ENU/Maya/files/Transforming-objects-The-pivot-point-htm.html (Accessed: 10th October 2016). (2016) 3-D Coordinate Systems, Available at: https://msdn.microsoft.com/en-us/library/windows/desktop/bb324490(v=vs.85).aspx (Accessed: 2nd October 2016). (2016) 3D coordinates, Available at: https://knowledge.autodesk.com/support/maya/learn-explore/caas/CloudHelp/cloudhelp/2016/ENU/Maya/files/GUID-FDC58F4E-63B9-4012-B232-5F2FBAC5EAC9-htm.html?v=2016(Accessed: 4th October 2016). (2016) Level of Detail, Available at: https://docs.unity3d.com/Manual/LevelOfDetail.html (Accessed: 14th October 2016). (2016) Perspective (graphical), Available at: https://en.wikipedia.org/wiki/Orthographic_projection (Accessed: 3rd October 2016). (2016) Perspective (graphical), Available at: https://en.wikipedia.org/wiki/Perspective_(graphical) (Accessed: 3rd October 2016). (2016) UNDERSTANDING UV MAPPING, Available at: http://www.steves-digicams.com/knowledge-center/how-tos/video-software/understanding-uv-mapping.html#b (Accessed: 6th October 2016). Banninga, R (2004) UV Mapping Tips And Tricks, Available at: http://www.gamasutra.com/view/feature/130484/uv_mapping_tips_and_tricks.php(Accessed: 14th October 2016). Bell, G () Creating Backgrounds for 3D Games, Available at: http://www.gamasutra.com/view/feature/131701/creating_backgrounds_for_3d_games.php?print=1 (Accessed: 10th October 2016). Cahill, P (2016) 3D Modelling Basics Terminology3D, Available at: http://www.onlinedesignteacher.com/2014/07/3d-modelling-basics_33.html (Accessed: 6th October). Cole, T.B (2015) VERTEX COLOUR, Available at: http://www.timbencole.com/vertexcolour (Accessed: 11th October 2016). Dennis (2007) UV coordinate basics, Available at: http://www.rozengain.com/blog/2007/08/26/uv-coordinate-

Friday, September 20, 2019

A Review On What Is Nationalism Cultural Studies Essay

A Review On What Is Nationalism Cultural Studies Essay Nationalism can be defined as a potential ideology that engenders a strong identification of a group of individuals with a nation. This ideology strives toward a common culture, including shared meanings, symbols and recognition of mutual rights and duties to each other as part of a shared membership of the nation. It therefore claims on behalf of the nation a right to constitute an independent autonomous political community based on a shared history and common identity. For many years, sociologists have argued that the identification of people or categorization into homeland cultures and origins is very complex. (Appaduarai 1990, said, 1986, Gifford 1998) and that the word identity is too ambiguous (Brubaker and Cooper 2000). They state that its meaning depends on the context of its use and the theoretical tradition from which the use in question derives. Nationalism can also be interpreted as the idea of sameness which manifests itself as solidarity in share dispositions and consci ousness or in collective action[from old essay] Throughout history and to this present day, sport has been frequently viewed as reinforcing national identification. For example the biggest championships are organised in ways to ensure that individuals represent their nation states. However with the effects of globalisation there has been a developing marked post-national dimension in national sport. For example, e.g. Englands premier league now includes a large and increasing proportion of foreign players. This has impacted domestic football and has ultimately led to a increase in foreign ownership in Englands Major clubs simultaneously affecting other sports too. In this essay, I will explore two contrasting theoretical models of nationalism: Ernest Gellners structuralist perspective and Andersons more culturalist theory of imagined communities and consider their applicability to modern sport. I will also attempt to demonstrate through several levels of sporte.g. national, transnational and local levelsthat nationalism plays an important role in each case. I then consider the effects of globalization on nationalism in sport. Ernest Gellner defines nationalism as primarily a principle that holds that the political and national unit should be congruent. (citation). He, thus, establishes nationalism as a political category, that is, the ideological agenda of delimiting the boundary of the polis to the ethnos, nation, or race. Gellner positions the rise of nationalism within the long-term shift from agricultural to industrial societies. Gellner suggests that industrialism has ultimately affected society, from basic social relationshow people interact with each otherto the overall political structure of communities. Gellner, like many scholars of nationalism, is a hard core modernist, his definition of modernity basically overlaps with industrialisation. Due to the changing structure of modern, industrial societies, a standardised high culture becomes necessary as work becomes more technical and impersonalised. Especially important in this process is the emerging system of mass education, which indoctrinates students as citizens of the nation. He makes the point that it is nationalism which engenders nations and not the other way round (citation) Among the contradictions nationalism generates, Gellner advances his characterisation of eastern nationalism: state enforced homogenisation, which he uses the metaphor to describe it as the empire of megalomania which provokes the reaction of those who have been excluded or opted out on their own choice in order to protect and preserve their own culture. [include a few other examples from text] As a society-focused structural functionalist, Gellner argued that ideology did not figure prominently in the development of nationalism. The LSE scholar Klie Kedourie on the other hand, a historian of ideas, maintains the opposite view (citation). Similarly, Benedict Anderson suggests that the idea of nationalism is vitally linked to when someones identity and persona are formed. Though a Marxist, and structuralist in this sense, Anderson argued that we were about to enter in a fundamental transformation in the history of Marxism and Marxist movements are upon us (citation). He claimed that the recent wars between Vietnam, Cambodia and China relax this and there are visible signs of cultural transformation. Connecting the emergence of nationalism with the structural transformations of print capitalism Anderson noted that England with the help of the printing press by Gutenberg made great strides to develop their own unique language to rival the invasion of Latin and French vocabular y. This constituted a development of power, which Britain extended into money with the help of colonialism, and the expansion of power into imperialism. Andersons core thesis is that nations are an imagined political community and imagined as both inherently limited and sovereign (citation). He argue that nations are imagined because the members of even the smallest nation will never know most their fellow-members, meet them, or even hear of them, yet in the minds of each of them lives the image of their community. The nation is imagined as limited because even the largest of them, encompassing perhaps a billion living human beings, has finite, if elastic, boundaries, beyond which lie other nations Like Gellner, Anderson notes that nations are a product of nationalism, noting nationalism is not the awakening of the nations to self-consciousness: it invents nations where they do not exist (citation). However, Andersons attention to ideological influences is less structuralist than Gellner. In relation to sport, Andersons conception of imagined communities seemed to be much more salient. The ideological coherence engendered with sport connects the symbolic and emotional effervescence of sport and nation in complex ways irreducible to the structural changes from agrarian to industrial societies. This is even more so the case during the recent changes in the context of globalisation. Nationalism is an important factor in sport as observable at several levels of analysis. Sport can be broken down into three levels: national, transnational and local levels. Much literature has been written on the connection between sport and globalization in particular soccer and globalization. In Un) bounded soccer demonstrates nationalism on a national level, Ben Porat discusses the interrelationship between football (soccer) and globalization in Israel. Globalization has, as many scholars would argue become a part of everyday life. The link between globalization and sport deserves attention and study because sport is big enough to not only reflect the process of globalization, but to also leave an imprint and affect the way globalization as an idea is thought about. Porat examines the development of soccer in Israel through several stages, adopting the view that globalization does not pound everything into the same mould (Mittleman, 2000) but instead its process is not even and the outcomes are affected by developments on a global and local scale. Porat believes Is raeli soccer, like the rest of society is affected and altered by the changing global context and key interactions between globalization and the local structure and dynamics. He(?) argue that soccer in Israel came about under certain boundaries within a state-centred economic and political context that outlined a political model for the organization of soccer. As Israel gradually became more capitalist and as globalization took place this lead to a transformation from a political model towards a economic model- as Israel went through the process of becoming capitalist this ultimately lead to it opening up to globalization The article ( When they studied the impact the globalization had on soccer they broke it down into three categories: the flows of capital, labour and culture. It is logical to initially assume that the impact of globalization probably is uneven and certain flows may occur first or be more dominating. The article is based on a general study of globalization in Israel (G. Ben Porat 2002) and the transformation of soccer from a game to a commodity (A. Ben Porat 2003), all of the information was gathered from the Israeli soccer association (IFA), the Wingate Institute, The soccer budget control authority and the sport sections of daily newspapers and finally interviews with IFA officials. They begin with a brief theoretical overview of globalization, then in the second part talk about Israeli soccer and its setting as an institution. In the final part they analyse the change or transformation of Israel soccer- the three global flows capital, labour and culture. Nationalism can also been found in sport at local levels and this is shown in the article Territory, Politics and Soccer Fandom in Northern Ireland and Sweden by Alan Bairner and Peter Shirlow- they compare two completely unconnected football clubs in two very different societies and show how in fact they are very similar in the way nationalism is observed and demonstrated at each club on a local level. It has been noted on several occasions that football fandom and identity politics are linked and widely interchangeable. How their linked more is more complex than it may initially seem. In this paper two sets of fans are analysed and they are complete polar opposites in terms of the societies them come from. The first group are Linfield supports who come from Northern Ireland and use their team as a means of expressing cultural resistance where the club and stadium is a safe haven for people with similar views due to the division of political and religious views in Northern Ireland- it has become their own (as Bairner and Shirlow put it) imagined community. The second group is a set of AIK supports from Sweden- they show than soccer fandom can turn a group of supports into a collective self which can turn in defiance against a perceived threat of the other. For a large number of people in the modern world, sport plays a vital role in the construction and reproduction of part of peoples identity and partially more in males. Two Australian sociologists Roy Jones and Phillip Moore argue that in a football stadium ethnic minorities can reinvent their identity to become part of the wider group. Even though players can detach themselves for the social and political aspects of the game, for the supporters Vic Duke and Liz Crolley (1996) believe that football matches never take place in isolation:The participants (the fans) do not cut themselves off from external matters. In a sense, football does not cut out external factors but acts more like a sieve that a solid wall, and the sieve is that only selecting but modifying what it filters (Duke and Crolley 1996) Linfield is supported to almost in its entirety working class protestant men. They use their football clubs as a means of expressing and vocalising there resistance. The Swedish club identity is equally tied up with its affection towards a particular stadium and its landscape or territory that it is suppose to represent. Just like the Northern Irish fans, fans of AIK- the black army have been involved, even if subconsciously with the creation of iconographies and an imagined community and there expressions of devotion to it. The article conveys a sense of the localised nature of politics of territorial control and resistance Fletcher explores nationalism in sport on a transnational scale. The article commentates on the events that took place in the historic cricket group of Lords in 2009 (citation). The article explores British Asians sense of nationhood, citizenship, ethnicity and how they manifest themselves in relation to sports fandom. Fletcher uses the example of Cricket and how it is used as a way of expressing British Identities. He looks to Norman Tebbits cricket test to help understand the intricacies of being a British Asian supporting the English national cricket team. The first section looks at Tebbits test and attempts to locate its place within the wider issue of multicultarism. Later the analysis focuses on the discourse of sports fandom and the idea of the home team advantage placing forward the concept that sports venues represent sites for the expression of nationalism and cultural expression due to their connection for national history. The article states that supporting anyone but England and therefore ultimately rejecting ethically exclusive notions of Englishness and brutishness continues to define British Asians cultural identity. The inspiration for the paper came on the 14th June 2009 when England played India at Lords the Home of English cricket. Despite of the fact England won comfortably the contest was overshadow by the days earlier events off the pitch. In the warm up match prior to the game it was revealed that the team had been jeered and booed by hundreds of British Asians who had come to support the Indian team (Indian Express). Following this event there was uproar within the cricket community as to British Asians sporting allegiances, their British citizenship. The data was collected during fieldwork undertaken between June 2007 and January 2010 with two amateur cricket clubs in south Yorkshire. One was mostly white in membership, the other British Asian. The predominately white club is known in the local area to be middle class and had been criticized by those within the game as failing to move with the times. Those from the British Asian club had either been born in Britain or had emigrated during the late 1980s and early 1990s. Research was based on semi-structured interviews, focus groups interviews and participant observation. Matchs training sessions and even social gatherings were attended (when possible). Yorkshire cricket had been known to be racist and suffer from racial inequality for a long time. The north of England on the whole had been plagued with a number of racially motivated civil disturbances such as the Bradford Riots (1995) and the Oldhan Riots (2001).As recently as August 2010 Bradford- known for its large south Asian communities, hosted English defence league demonstrations. This highlights the interaction between nationalism at the local level. Interestingly Scotlands whole sporting identity is formed around their hatred of England- We are the England Haters is a common chant which is sung about football and other sporting events. Whether this chanting is self-parodying or a genuine attempt to antagonise the English fans it is ironic that there whole identity is reliant on Englands existence. Perhaps more sinisterly the scots hatred of England runs deeper than just in football and is in fact a part of their national identity as a whole. It could be argued that Scotlands attempt in recent years to become a independent nation and be free from the crown represents this. To a large number of people in America sport plays a important role in creating a sense of what it means to be an American. It also represents a field where individuals can assert their dominance over their subordinates. Probably one of the clearest examples of this in American sport is in Ice Hockey, where its actually legal in the game if the gloves are thrown off to fight each other and the referees will often let them fight until one is tripped over. Hockey is a sport created by the Canadians. However it didnt gain the popularity it has now in the country overnight. It wasnt until the earlier 20th century that it really become recognised as an international sport. However it has become so popular in the country that in terms of its symbolic power it has been placed alongside other national institutions such as the federal government the public health care system and the Canadian broadcasting corporation. So it has encorporated what it means to be a candian Canada is hockey is a common slogan which can apparently be found on t-shirts being sold on many NFL games. In conclusion it can be seen that nationalism is prevalent in the world of sport, and it seems to be ever present regardless of how big the stage is. As I discussed earlier nationalism can be found at a local, national and transnational scale. Nationalism put simply is a ideology where individuals are linked by there strong identification with their home nation. Nationalism can be observed in many parts of society not only in sport but in many parts of culture. Out of the two perspectives which were discussed throughout this essay (gellners structuralist perspective) and Bendicts andersons imagined communities his more culturist argument seems to have more substance and is more of a solid argument. It was interesting to seem just have nationalism was engrained in the world of sport not just through Britain and the western world but seemingly throughout the whole world as well. Gellner diferiantes nationalism in the east as being state enforced homogenisation where he used his example of calling it a empire of megalomania.

Thursday, September 19, 2019

The Addictive Nature of the Internet Essay -- Addicting Internet Web C

The Addictive Nature of the Internet The purpose of this paper is to show the many different ways that people can become addicted to the web (Internet) and to try to explain why. The various aspects of the web, such as the wide range of information, the advanced technology, and alternate ways of communication have contributed to its addictive nature. People of all ages and backgrounds have become so absorbed in using the web, either through work or play, that they have, in effect, become addicted to using it. Some common types of sites which people just cannot seem to stay away from include chat rooms, dating services, sex, pornography, shopping, and sports. The prevalence of Internet use and the growing realization that it has become an addictive vice for some has spurned the creation of groups such as Webaholics Anonymous, Interneters Anonymous, Netaholics Anonymous, the Internet Addiction Association, and the Internet Addiction Support Group (IASG). All of these self-help groups can be sought on-line, which is rather ironic, given the topic, but nonetheless the groups seek to aid those addicted to using the Internet. The name, Internet Addiction Disorder (IAD) has even been given to this growing phenomenon of Internet addiction. "Addiction" as defined by Webster's New World Dictionary is "the condition of being addicted (to a habit) or of being an addict." "Addict," on the other hand, is defined as one who has given oneself up to some strong habit. Some may say that being addicted to using the Internet is not a "true" addiction, but according to the Webster definition, Internet addiction can be and is every bit as real and as hard to manage as a drug or alcohol addiction. Depending on where it is one looks ... ...ng from. Anyone who thinks that they may have a problem or knows someone who does should try to be open and honest about it, and should seek help before the situation becomes out of control. For anyone who reads this who is addicted to the Internet, I wish you the best of luck in controlling the disorder. For anyone else, beware of the possibilities! Works Cited "Results of Internet Behaviour Questionnaire." http://www.ifap.bepr.ethz.ch/~egger/ibq/intadd.htm. (April 15, 1997) "Richard's Web Central - Interneters Anonymous." http://www.itw.com/~rscott/ia.html. (March 20, 1997) "Self Help & Psychology Magazine Article: Internet Can Be As Addicting As Alcohol, Drugs And Gambling." http://cybertowers.com/selfhelp/articles/internet/intaddic.html.(March 20, 1997) "Symptoms of Internet Addiction." http://www.addictions.com/internet.htm. (March 20, 1997)

Wednesday, September 18, 2019

Cuban Missile Crisis: The Brink of Global Nuclear War Essay -- History

Cuban Missile Crisis: The Brink of Global Nuclear War The Cuban Missile Crisis had a huge impact on society even years after it was resolved because the incident had brought our nation and the world so close to the brink of nuclear war. Before the Cuban Missile Crisis had occurred, many other factors had been piling up and building undesirable tensions between many countries. Along the way new allies and enemies were made causing more stress to the Cold War. The new bonds that formed after Cuba was taken over by Fidel Castro pushed nuclear war to the very edge. Many changes in Cuba caused tensions to mount between the United States, Cuba, and Russia. At the time before the Bay of Pigs incident, Cuba had a corrupt dictator that ruled the people without giving them much freedom. President Fulgencio Batista was an ally to the United States because American companies that were based in Cuba did not have many restrictions. Many wealthy Americans owned plantations on the island of Cuba because of the lack of restrictions. This all changed in 1959 when Fidel Castro took over. Castro wanted to limit American influence and cut ties with the United States. Castro quickly made attempts to be allies with the Soviets. For Castro's attempt to woo the Soviets, the United States stopped the importing of sugar from Cuba. Cuba's economy would have suffered terribly if they could not find a buyer. The Soviets agreed to buy all of the sugar. After this the United States cut off all relations with Cuba. The United States and Cuba were no l onger allies even though they were only separated by a mere 100 miles. While the Cold War loomed over the heads of the world, the President of the United States tried to think of way... ...ry.navy.mil/faqs/faq90-1.htm>. Naval Historical Center, 1993. "Cuban Missile Crisis - John F. Kennedy Presidential Library & Museum." John F. Kennedy Presidential Library & Museum. Web. 22 Jan. 2012. . Web. . Web. through . Web. Pike, John. â€Å"Cold War in the 1960s†. 2012. ops/cold-war-1960s.htm>. Web. â€Å"Limited Test Ban Treaty.† U.S. Department of State. January 22, 2012. . Sting. "Russians." The Dream of the Blue Turtles. A & M Records, 1985. Vinyl. Berkin. Making America : A History of the United States. Wadsworth, 2012. P. 354

Tuesday, September 17, 2019

Literary Semiotics

Literary Semiotics Quite often the terms semiotics and semiology are equal, so that often instead semiotics use semiology and vice versa. Ferdinand de Saussure speaks of the sign and the first makes the distinction between semiotics and semiology. Semiotics is the general theory of signs. Semiology study the functioning of the sign in the social practice. Today avoids this distinction and semiotics equate with semiology, ie, they are synonyms. GENERAL Semiotics: The sign does not exist only in language and literature, but in the film we have and tone as a sign, signs of the folk tradition (clouds as signs, etc.. . The sign is a general phenomenon that exists in all forms of human communication. With the help of the sign announce something. The sign communication across borders communion. It is believed that she sign communication has with animals, plants etc.. Within the general linguistic information and communication there is the literary form of communication between author and r eader, between the work and the reader etc.. Semiotics is shared:First Semantics – which focuses on the relationship between sign and signified; Second Pragmatics – is a discipline that focuses on the relationship between the sign and the reader; Third Syntax, syntax – is a discipline that focuses on the relationship between signs, eg. : Texts as signs books as characters. Semiotics makes several typologies and distinguishes several types of sign systems: First PRIRODOJAZICHNI SYSTEMS – define them as first-and include natural languages, ie national languages (English, French, etc. ).. These are the languages that are characterized by a specific practice use.In these systems each character is in relation to an object (reference) from the reality. Not all characters are specified, does not always mean only objects that exist, which are in reality, but there are also abstract, metaphysical signs that signify something that is not tangible, but still exist s in our consciousness. Second Artificial sign systems – Artificial signs we have in mathematics, science and so on. These signs are called artificial, because they agreed. These include road signs, sign language of the deaf, blind etc.. => Structure is a way of organizing systems.System and structure are inseparable. Third Secondary, secondary sign systems – usually build on existing linguistic systems and does not always refer to things that exist in nature. Literature uses natural language to translate literary, coding, etc. All secondary languages have pre-need of natural language and together constitute some already performed sign systems, such as. Literature. Secondary sign system eg. Myth – iconic, pictorial system. 4th Mixed HIBRIDIZIRANI SIGNS – eg. Essay which combines prirodojazichen system and a secondary sign system and pictorial system. th METAJAZICI – Metajazichni systems, metalanguage thoughts when one language describes another ki nd of language that is already built, eg. Theory of literature has described the literary language. There are meta-meta languages, such as literary criticism, literary methodology etc.. Semiotics distinguished: linguistic and nejazichni signs, verbal and non-verbal. Semiotics distinguishes several types of signs: First -Symbols – symbols are all coded signs and they denotativni. These signs have a high degree of codification and konvencionalnost. In these signs the relationship between the sign and the signified is kodiviciran.Second Sign-image – in these signs the relationship between sign and signified is vividly. Iconic signs konotivni signs. The model has features of artistic creation. Third Sign-INDEX – among them the relationship between sign and signified is causal. These signs are generally semiotic. Example: Where there is smoke there is fire. Among them there is a logical connection that occurs as a result of long-term perception. Eg. before an earthqu ake occurs, animals are disturbed, I felt mean. Also, prior to such disasters, we get information, warnings from other planets. All this belongs to indeksnoto information.Semiotics differs constant and variable signs. The sign indicates the object replaces the subject. Therefore, the sign is viewed by the subject marks. To sign appears must e apostoi need an item to be replaced, to signify. Roman Jakobson describes knizhenosta literary self-referential aesthetic message. Piece of literature at the same time can be referential (aesthetic) and referential. Znakovnosta literature does not exhaust WMO interest signified. The sign is a complex composition (signifier + signified). With signs serving entities, transferring to other entities, which means that there must be an agreement.In literature, there is a higher level of esthetics, but this does not exclude pragmatism. While eg. in journalism, a higher degree of pragmatism, but it does not necessarily mean that there is no aesthetic. There is intertextuality. For example, the parody – there parodiziranje literary work that already exists, we mythema, whose basic text comes from another, previously written text hipotekst. Even in the literature have metajazichnost yet dominate vtorostepenosta. It should be noted and the consideration that relates to the fact that there is a difference between literary and linguistic systems.Some systems faster change, others more slowly. Systems include konvencionalizirani relations imply a certain constancy legality. Speech is practice the kind of language use. Linguistic system is slowly changing. A change in the system of language comes when occurring changes in the conventional system. The change in the lexicon is not a real change in the language, but the change in syntax is a real change, because the syntax is a mirror of the language, it is the soul, the essence of language. In the 20th century resulting rapid and radical changes in literary systems, and in language systems can not change for centuries.Literary system as a secondary Literary Semiotics Systems vary in degree modelativnata power. Systems have a high degree of first instance modelativna power and appeal have lower degree modelativna power. Literature is not that important (secondary) sign system. In the literature, the language system is reorganized in a different way, because prirodojazichniot system is already encoded, he once again coded in the literature, which means that the literary system is doubly coded. = CODE = Code means is prohibited and what is not. The term â€Å"code† is not a purely literary term, but comes from egzaknite sciences (mathematics, computer science).Code shows us the optimal boundary between the forbidden and permitted. Modelativnata power is the ability to present a subject in the form of linguistic or literary figure. The model is a picture of the items indicating displays a single character. Model of the object is displayed in a text can be closer to the world that displays, but can be distant. Therefore, some characters are considered to be relatively more realistic poreferencijalni, open to predmetmetot and others are considered less referential, hermetic and more confined to the subject.Structure prirodojazichniot sign implies a direct connection between the sign and the referent. A literary system that relationship between the sign and the object is indirect, and even invisible. When reading the signs, the whole array of interpretenti that are sorted from other sign with any reader pbuduva whole range of different images, each reader think differently. For example, the term â€Å"Company† each poimuva different: one has a no house, stone house, ruined house, a beautiful house, a house-snail, small house, white house etc.. Models, the image of the subject in the literature represents what must exist, what can be absent.Ordinary language signs poreferencijalni, because the connection between the sign and the m atter may be provieri, and in literature it has not. Some literary characters completely reject referentiality and identify as nereferencijalni or auto-referential. They completely distracted by the relationship between the sign and object, life, the world, etc.. But after Mallarme annulling all those links, they are invisible, and even signs can not signify anything other than themselves. These marks signify themselves and thus resolve the question of the definition of the sign that always means something that exists outside of them.These characters have their origin and their long-lasting tradition. Repealed logical connections between them, or at least invisible at first glance. There are literary characters to a greater extent referential and such that auto-referential, that encourage thinking the sign, except the exact information they want to offer something more to the subject, ie the world who represent; those signs tend to have a broader, more universal information how orga nized life and the world. In the literary system is activated principle sozvuchnost musicality, that activates the eneral signification semiotichnost, which plays a major role in the formation of literary texts that it does not matter what you say, but how you say. There are two completely identical words. Ordinary linguistic signs are distinguished by a high degree of symmetry between the object and the sign by which that object is marked. These signs are harder legible because they distort the image of a world that is marked with this sign; while doing so because of the asymmetry between the sign and the object, ie the world; not think of anything specifically. Literary system is: First secondary, secondary;Second double coded; Third iconic, picturesque, with a high degree modelativnost; 4th relationship between the object and the sign is asymmetric; 5th shows interest in the character and high degree of auto-and at the same time and communication and information. It is believed t hat all these properties of the literary system, its structure shows in a nutshell – the tropics. It is believed that ordinary language tends to conventionalize be used automatically, but literary-art information tends to be something more than mere information. In this sense, ordinary expressions have low informativnost.The purpose of literature is constantly questioned images umrtvile forgotten language, and it achieves when they express will deliver another new context and text and no more primates using automated. What's old, already seen, automated, predictable, does not carry much information. But when you make a transformation, modification context, the degree of unpredictability gives it clear that there is some degree of artistic expression. What is stereotypically can perform literary function only when you are questioned and it will say something new, unknown, unpredictable.In literary communication is very important reader that fits into his measure expectation is already known, conventional, and what exceeds this measure is shocking and purely literary. To develop the system, it should be constantly introduce changes that will have a radical character. It is believed that the literary system is a complex system, because it is simultaneously modelativen iconic communicative, informative etc.. STRUCTURE AND LITERARY-artistic structure The term structure is taken from disciplines that have the exact character. This term means the constitution, construction, structure, composition.Can speak of a connection between the structure and the system (composition pragma). Pragma-linguistic semantic __ decorative what is encountered in all literary genres. Literary form is prezentativen. There is a prejudice that oako speaks of structure, must be taken only strucuturalist method. Strucuturalist method of studying literature immanent – within, regardless of external factors. Structure – nestatichna. This term has its prehistory and predstru kturalistichkiot method. Promotes the emergence of Saussure, then in Prague structuralists in 30 years (Roman Jakobson).The structure is a way of organizing a race, when you are thinking of something dynamic, live outdoors. But it always is a minimum order, which can be viewed transhistoric outside of literature. It shows anthropology and linguistics. Distinguished two levels of understanding society. Archetypal structures – which manifests Oedipus, infanticide, Phaedra, and it asa eglavno negative occurrence. They are constantly renewing, changing WMO their name, the essence is the same. When speaking of the structure, not thinking assemblies, but the relationship between these parts that are different relations.The structure is latent given, you need to be activated to express a given relationship. It is not a material category, but a correlation between at least two parts, as part of one great whole. There must be a ratio of that unit which is higher than those who own par ts. The label may not mean anything. Even the sign is a higher instance. It establishes relations between the sign and the signified. The context shows us how the text structures and includes the subject, as well as the channel through which they passed.The structure is separable elements that make up the parts that build a third instance. It is not equal to the sum of those parts. The idea of structure has its own continuum from Plato onwards. When speaking of a literary work of art can not change the way the author laid the parts. Work itself has a rigid structure, there is coherence. Any literary work of art has a minimum structure, within a text is completed. Structure does not exhaust in terms of the text itself, but continues in the relations between texts that are external.The internal structure is latent, but in proportion with the reader that changes its character. Structure becomes external, opens to a text read in a social context of a given epoch. It opens towards the c ategory of value, ie toward non-literary categories participating in the reader and the author. The text-reader-author is different in the written and oral tradition. In oral literature there is a collective, multidisciplinary artist, oral text is intended for a different kind of reception kolektiviet (holidays protakularni religious rites). The novel is an individual kind.It introduces a new relation to the adoption of the text (information and understanding). In everyday communication relationships are different speakers-reader known. In the literary work of art speaks of aesthetic structure – art. That does not mean that it is polisemantichka multifunctional (educational, ethnic, linguistic, fun, social). Linguistic literary system implies certain conventions. The literary structure is composed of text and context (genre code metajazichnosta all types of channels, psychological, biographical, biological factors).Literary structure implies something conditionally given (tex t). Contextual factors – open. The text is the primary datum in the literature. He builds with just reading and valued. Ultimately, it ends in a new value. Text Literary and artistic text Textus Lat. textus = texture, fabric, specific kind of tissue taken from the material environment and ported in the literature. Text – a literary work of art and represents graphic zvukoven part of the work. It is unchangeable part, material, literary and artistic work that is more complex, consisting of immaterial part style.Literary-may be in oral and written (literary) form. Text changes its status through history is part of the moral language conventions. The text is also linked to the development of human civilization. Associated with civilization signs. Each text is articulated and systematized, it is to communicate with him. The author (individual or collective) and the sign, by linking the text for a long time, and the reader was switched off. Today is considered that the read er can influence those literary conventions. Differences between the literary work of art and literary and artistic text.The text is considered an open category, sign, while the work is closed category, the whole classic with reduced significance. It is a theory of Roland Barthes and structuralists in France. Variability of the text seen in the oral tradition. Textuality is as fixed as a material part of the work. Each text serves not only to inform, but also to communicate. Text as a cultural and artistic means authorship readers act vrednvuanje denial and others. Cultural and artistic text linking at least two dimensions – historical and artistic ontological. There are literary and non-literary texts.